I made a Pop Up Slider Christmas Card
with the new releases Naughty Or Nice,
Dazzlia and Delightful Sentiments Collection
with the new releases Naughty Or Nice,
Dazzlia and Delightful Sentiments Collection
from Couture Creations.
Step by step instructions:
Here is the link to the video on how to:
- Partial die-cut with Modern Essentials Rectangle Cut, Foil and Emboss Die;
- Create Pop Up Section with Mini Score Board and
- Create the Slider.
Video Link:
https://youtu.be/QsoLJJWcaLo
2. Use Partial Die-cut Technique with Cut, Foil and Emboss Die:
- Place patterned paper on first cutting plate.
- Lay Modern Essentials Rectangle Cut, Foil and Emboss Die
in the centre of the patterned paper.
- Carefully place the second cutting plate on top of the die
so that everything is covered by the plate
except for one end of the rectangle die.
- Place patterned paper on first cutting plate.
- Lay Modern Essentials Rectangle Cut, Foil and Emboss Die
in the centre of the patterned paper.
- Carefully place the second cutting plate on top of the die
so that everything is covered by the plate
except for one end of the rectangle die.
- Run through the die-cutting machine.
3. Creating the Pop Up Section:
- Using the Mini Score Board create a score line
across the top section of the rectangle to create a fold
(section that was not cut).
- Create a score line in the centre of the rectangular piece.
- Create last score line on the end of the rectangular shape.
Score line needs to be approximately 1/4".
- Fold on all of the score lines to create a little tent.
4. Creating the Slider:
- Trim Cypress Pine Cardstock to 2 7/16" x 4 3/4".
- Trim Naughty or Nice Pattern Paper to 2 5/16" x 4 5/8"
and adhere onto cardstock using double sided tape.
- Take cardstock and slide it in behind
the rectangular shape on your patterned paper
until it meet up with the bottom of the rectangular opening.
- Add glue to the 1/4" scored section on the bottom of the card.
Lay the rectangle section flat and adhere the 1/4" section
to the bottom of the green slider piece.
- Flip over the patterned paper, with the slider piece attached,
and add double sided tape to the side
and bottom of the patterned paper.
You want to make sure that you do not add any double sided tape
to the green slider piece or it will not slide.
- Adhere onto the card base.
6. Use Inked Letterpress Technique with Cut Foil and Emboss Die:
- Ink Have Faith Cut Foil and Emboss Die.
- Place Cypress Pine Cardstock onto die
and run through die-cutting machine.
- Adhere onto top of slider.
7. Die-cut with Cut Foil and Emboss Die:
- Place Mirror Board onto
Hope Sentiment Cut Foil and Emboss Die.
- Run through die-cutting machine
and adhere onto card front.
- Using the Mini Score Board create a score line
across the top section of the rectangle to create a fold
(section that was not cut).
- Create a score line in the centre of the rectangular piece.
- Create last score line on the end of the rectangular shape.
Score line needs to be approximately 1/4".
- Fold on all of the score lines to create a little tent.
4. Creating the Slider:
- Trim Cypress Pine Cardstock to 2 7/16" x 4 3/4".
- Trim Naughty or Nice Pattern Paper to 2 5/16" x 4 5/8"
and adhere onto cardstock using double sided tape.
- Take cardstock and slide it in behind
the rectangular shape on your patterned paper
until it meet up with the bottom of the rectangular opening.
- Add glue to the 1/4" scored section on the bottom of the card.
Lay the rectangle section flat and adhere the 1/4" section
to the bottom of the green slider piece.
- Flip over the patterned paper, with the slider piece attached,
and add double sided tape to the side
and bottom of the patterned paper.
You want to make sure that you do not add any double sided tape
to the green slider piece or it will not slide.
- Adhere onto the card base.
5. Grab the slider and create a small hole in the slider.
Thread a bit of ribbon through the hole and tie a little knot.6. Use Inked Letterpress Technique with Cut Foil and Emboss Die:
- Ink Have Faith Cut Foil and Emboss Die.
- Place Cypress Pine Cardstock onto die
and run through die-cutting machine.
- Adhere onto top of slider.
7. Die-cut with Cut Foil and Emboss Die:
- Place Mirror Board onto
Hope Sentiment Cut Foil and Emboss Die.
- Run through die-cutting machine
and adhere onto card front.
8. Die-cut Mirror Board with
Naughty or Nice Dasher Mini Die;
Ultimate Crafts Rambling Rose Mini Sprigs Die and
Love Sentiment Mini Die.
Adhere onto card front.
9. Die-cut Cypress Pine Cardstock
with Highland Christmas Forest Die.
Adhere onto card front using 3D foam dots.
10. Add Naughty or Nice Die-Cut Ephemera
onto card front to finish.
Naughty or Nice Dasher Mini Die;
Ultimate Crafts Rambling Rose Mini Sprigs Die and
Love Sentiment Mini Die.
Adhere onto card front.
9. Die-cut Cypress Pine Cardstock
with Highland Christmas Forest Die.
Adhere onto card front using 3D foam dots.
10. Add Naughty or Nice Die-Cut Ephemera
onto card front to finish.
Couture Creations products I have used:
C0726752 Mini Score Board
C0726739 Dazzlia Have Faith Sentiment Mini Cut Foil and Emboss Die
C0726959 Delightful Hope Sentiment Cut Foil and Emboss Die
C0726904 Naughty or Nice Dasher Mini Die
C0726890 Naughty or Nice Pattern Paper 03B and 08B
C0726903 Naughty or Nice Die-cut Ephemera Set
C0726456 Modern Essentials Nesting Rectangles Cut, Foil and Emboss Die
C0726091 Mini Die - Love Sentiment & Heart
C0726291 Highland Christmas - Christmas Forest Die
ULT157321 Ultimate Crafts Rambling Rose Mini Sprigs Die
ULT200031 Ultimate Crafts Cypress Pine Cardstock
C0725410 Mirror Board Matte Gold
J7023-091 Brilliance Galaxy Gold Ink Pad
AD90017 Couture Creations Double Sided Tape 12mm
C0726752 Mini Score Board
C0726739 Dazzlia Have Faith Sentiment Mini Cut Foil and Emboss Die
C0726959 Delightful Hope Sentiment Cut Foil and Emboss Die
C0726904 Naughty or Nice Dasher Mini Die
C0726890 Naughty or Nice Pattern Paper 03B and 08B
C0726903 Naughty or Nice Die-cut Ephemera Set
C0726456 Modern Essentials Nesting Rectangles Cut, Foil and Emboss Die
C0726091 Mini Die - Love Sentiment & Heart
C0726291 Highland Christmas - Christmas Forest Die
ULT157321 Ultimate Crafts Rambling Rose Mini Sprigs Die
ULT200031 Ultimate Crafts Cypress Pine Cardstock
C0725410 Mirror Board Matte Gold
J7023-091 Brilliance Galaxy Gold Ink Pad
AD90017 Couture Creations Double Sided Tape 12mm
C0726428 Couture Creations Foam Dots
For Stockists click the link below:
https://couturecreations.com.au/pages/store-locator
I would like to enter the following challenges:
Happy Crafting!
Anet
I would like to enter the following challenges:
The 12 Months Of Christmas Challenge Blog. Theme: Anything Goes.
Classic Design Team Challenge Blog. Theme: Anything Goes.
Morgan's ArtWorld Challenge Blog. Theme: Anything Goes.
Crafting with an Attitude Challenge Blog. Theme: Anything Goes.
Brown Sugar Challenge Blog. Theme: Anything Goes.
Creative Fingers Challenge Blog. Theme: Anything Goes.
Crafty Creations Challenge Blog. Theme: Anything Goes.
The Creative Crafters Challenge Blog. Theme: Anything Goes.
World Wide Open Design Team Challenge Blog. Theme: Anything Goes.
The Creative Crafters Challenge Blog. Theme: Anything Goes.
World Wide Open Design Team Challenge Blog. Theme: Anything Goes.
Thank you for visiting today and I hope you enjoyed
how I created my Pop Up Slider Christmas Card.Happy Crafting!
Anet
Beautiful and so creative, love how you have put all this together, great colour choices. Thank you so much for joining us in our Morgan's Artworld Open Challenge atMorgan's Artworld Open Challenge this week. We would love to see you again in our next challenge.
ReplyDeleteFaith Morgans Artworld DT
Fantastically designed project and thank you so much for the amazing tutorial. Well done. Great work. Thank you for sharing with us over here at World Wide Open Design Team Challenge and best of luck with your entry.
ReplyDeleteAnnette DT / Admin / Registered Owner for https://worldwideopendesignteamchallenge.blogspot.com/
Lovely project Anet. Thank you for sharing with us over here at World Wide Open Design Team Challenge and best of luck with your entry.
ReplyDeleteWendy DT Member for https://worldwideopendesignteamchallenge.blogspot.com/
Lovely work. Thank you for joining the challenge at the 12 months of Christmas cards link up and Creative Fingers. Hope to see you again next time.
ReplyDelete